Home » Brake answers » Why does my car pull to one side when I brake?
Brake answers
Why does my car pull to one side when I brake?
The short answer
A car that pulls to one side when you brake usually has one brake gripping harder than the other: a sticking caliper, a worn-out brake hose, uneven or contaminated pads, or a leak. Tires and alignment can make a car pull too, but if it only happens when you brake, the brakes are the first thing to check. Have it looked at soon.
The caliper squeezes the pads against the rotor. If it sticks, or its slide pins seize, that wheel brakes harder or drags, and the car pulls toward it. A wheel that smells hot, or one covered in more brake dust than the others, points to it.
A worn-out or leaking brake hose
A rubber brake hose can break down inside and hold pressure on one side, or let it through unevenly. A leak at a hose, line or caliper lets that side lose pressure, so the other side does the stopping.
Uneven or contaminated pads
Pads that wore unevenly, or picked up grease or brake fluid, grip less on that side, so the other side pulls the car.
A worn or uneven rotor
A rotor that's scored or worn unevenly changes how hard that wheel can stop.
Steering, suspension or tires
Worn steering or suspension parts, uneven tire pressure or an alignment that's out can all make the car drift, and braking makes it show. If it pulls when you're not braking too, these are the likelier cause.
When it pulls tells you a lot
A pull only when you brake points to the brakes. A pull all the time, braking or not, points to the tires, the alignment or the suspension. A pull that gets stronger the harder you brake usually means one brake is doing more of the work.
Check the tire pressures first. It takes two minutes, and a low tire on its own can pull the car.
Is it safe to drive?
A pull means one side isn't braking like the other, and in a hard stop the car can swerve. Drive gently, leave extra room, and have it checked soon.
If the pedal feels soft or sinks, the red brake warning light comes on, you smell burning or one wheel is much hotter than the others, don't drive it. Have it towed.
How it's fixed
It depends on the cause. A sticking caliper or a worn-out hose is replaced. Pads and rotors are replaced on both sides of the same axle, so the two sides match. A leak is fixed and the brakes are bled. If the brakes check out, the next look is the tires, the alignment and the suspension; alignments are done at select Budget Brakes shops, so call ahead.
At Budget Brakes it starts with the free six-point brake inspection: we measure the pads in millimetres and show you, and check the rotors, the brake fluid and the hardware. Lifetime warranty brakes start from $100, and you get a written price before any work starts. What a brake job costs.
More questions
Why does my car pull to the right when I brake?
It usually means the right side is gripping harder than the left: a sticking caliper on the right, or a weaker left side from a leak, worn pads or a worn-out hose. The same goes for a pull to the left. Have both sides checked.
Can tires make my car pull when braking?
Yes. A low or worn tire grips differently, and braking puts more weight on the front tires, so the difference shows. Check the pressures first. If they're right and the car still pulls only when you brake, have the brakes checked.
Will an alignment fix a pull when I brake?
Only if the alignment is the cause. A pull that happens only when you brake is usually the brakes, and an alignment won't fix a sticking caliper. Start with a brake inspection.
Your free brake inspection includes:
Worn outBrake pad thicknessBrand new
Measured, not guessed. New pads start around 12 mm. We start the conversation near 3 mm, and you see the number.
No pressure. Just answers.
Sixteen shops. One way of doing things.
Ready for every mile.
Quality parts at low prices, an honest look at what your car needs, and a guarantee that travels with you to any Budget Brakes.