16 shops across Alabama, Florida & Tennessee

Home » Brake answers » Do I need new rotors or just pads?

Brake answers

Do I need new rotors or just pads?

The short answer

You need new rotors as well as pads when the rotors are worn below the minimum thickness stamped on them, deeply grooved, cracked, or uneven enough to make the brakes shake. If the rotors are smooth, flat and thick enough, new pads alone may be all you need. The only way to know is to measure them, and that's part of the free brake inspection at Budget Brakes.

From the Budget Brakes shops · Updated

Worn brake pads beside new pads and a new rotor on a red shop towel, with a torque wrench

Signs the rotors need replacing

Worn below the minimum

Every rotor has a minimum thickness stamped on it. Once it's worn past that number, it has to be replaced, however smooth it looks.

Deep grooves

Pads worn to the metal cut grooves into the rotor. Light marks are normal. Grooves you can catch a fingernail in usually mean a new rotor. Grinding when you brake.

Shaking when you brake

A steering wheel or pedal that shakes when you brake usually means the rotors have worn unevenly. Why the wheel shakes.

Cracks or heat spots

Cracks, or blue and dark spots on the rotor face, mean it has overheated. An overheated rotor can't be trusted to stop the car evenly.

When pads alone are enough

If the rotors are above the minimum thickness, the surface is smooth and the brakes don't shake, new pads alone are often fine. That's most likely when you come in at the first squeal, before the pads wear down to the metal.

New pads start around 12 mm thick, and the conversation about replacing them starts near 3 mm. Have your brakes checked every 6 months or 6,000 miles and you'll usually catch them in time.

Is it safe to drive?

Worn rotors with pads still on them usually get you to a shop, but don't put it off. Grinding and shaking get worse, and a thin rotor runs hot.

If the pedal feels soft or sinks, the car pulls hard to one side, or the red brake warning light comes on, don't drive it. Have it towed.

What it means for the price

Pads with rotors costs more than pads alone, so it's worth knowing which one you need. At Budget Brakes the free six-point inspection checks the pads, rotors, brake fluid and hardware, and we show you the pad measurements. Lifetime warranty brakes start from $100, and you get a written price before any work starts. What a brake job costs.

More questions

Should rotors always be replaced with new pads?
No. If the rotors are smooth, flat and above their minimum thickness, new pads alone can do the job. Measuring them is how you know.
Can rotors be resurfaced instead of replaced?
Sometimes. A rotor with enough metal left above the minimum can be machined smooth. If machining would take it below the minimum, it has to be replaced.
How long do brake rotors last?
It varies with the car and how you drive. Rotors often outlast a set of pads, but pads left until they grind can ruin rotors quickly. Checking your brakes every 6 months or 6,000 miles is the safest way to know.
Do rotors have to be replaced in pairs?
Yes. Both rotors on the same axle should be replaced together, with new pads, so the car stops evenly and doesn't pull to one side.

Your free brake inspection includes:

Disc brake: rotor, caliper, pads, fluid line, hardware and hub 1 2 3 4 5 6
    Worn outBrake pad thicknessBrand new

    Measured, not guessed. New pads start around 12 mm. We start the conversation near 3 mm, and you see the number.

    No pressure. Just answers.
    A car driving down a two-lane country road at sunrise

    Sixteen shops. One way of doing things.

    Ready for every mile.

    Quality parts at low prices, an honest look at what your car needs, and a guarantee that travels with you to any Budget Brakes.

    Created by Etch Marketing Services
    Call Book free inspection Shops
    Budget Brakes coupon
    $15 off
    Brake repairs
    Show this screen at the counter.

    Book my visit