The parking brake is on
The red brake light also comes on when the parking brake is set, even by one click. Release it all the way. If the light goes out, that was it.
Home » Brake answers »
Brake answers
The short answer
Not until you know why it's on. First make sure the parking brake is fully released. If the red brake light stays on, the brake fluid may be low or the system may have lost pressure. Pull over somewhere safe, and don't drive if the pedal feels soft or sinks. A yellow ABS light means the regular brakes still work, but get it checked soon.
From the Budget Brakes shops · Updated

The red brake light also comes on when the parking brake is set, even by one click. Release it all the way. If the light goes out, that was it.
A sensor in the fluid reservoir turns the light on when the level drops. The level falls slowly as the pads wear, and quickly when there's a leak.
A leaking line, hose or caliper lets fluid and pressure out. The pedal travels farther or feels soft, and the car takes longer to stop. Soft or spongy brake pedal.
Some cars have pad wear sensors with their own yellow light, often a circle with dashed lines on each side. It means the pads are near the end.
A yellow ABS light means the anti-lock system has switched itself off. The regular brakes still work, but the wheels can lock in a hard stop or on a wet road.
Red means stop and check now. Yellow means have it checked soon. If the red brake light and the ABS light are on together, treat it as red and don't drive.
The symbols differ from car to car. Your owner's manual shows what each one means on yours.
If the light went out when you released the parking brake, yes. If only a yellow ABS or pad wear light is on and the car stops normally, drive gently, leave extra room, and have it checked soon.
If the red brake light stays on, or the pedal feels soft, sinks toward the floor or has to be pumped, don't drive. Have it towed.
Release it fully. On cars with a foot or electronic parking brake, make sure it's really off.
Stop somewhere safe. With the engine running, press the brake pedal. It should feel firm and hold. If it's soft or sinks, don't drive.
With the engine off, find the brake fluid reservoir under the hood. If the level is below the MIN line, fluid is leaking or the pads are very worn. Topping it up isn't a fix: it only hides the reason.
Every Budget Brakes shop does a free six-point brake inspection that covers the pads, rotors, brake fluid and hardware. You get a written price before any work, and nothing is done without your yes. Book online.
Measured, not guessed. New pads start around 12 mm. We start the conversation near 3 mm, and you see the number.
Sixteen shops. One way of doing things.
Quality parts at low prices, an honest look at what your car needs, and a guarantee that travels with you to any Budget Brakes.